Idiomas disponibles
Idiomas disponibles
ART. 12/23052-00
LCD/PLASMA WALL BRACKET INSTRUCTION
1. Technical parameter:
Maximum load:
Size of flat panel TV:
Pitching angle:
Weight (without attachment):
Distance from wall:
2. Part list:
Please check the parts in the package compare with the following list.
Make sure all of the parts are in the package.
Never use defective parts.
Never replace part with different specification.
Note: Incorrect installation may cause injury!
No
A
Self-tap screws
B
Plastic anchor
C
25*25 Shim
D
Plastic spacer
E
Ø 8 Flat washer
F
Ø 5 Lock washer
G
Ø 6 Lock washer
H
Ø 8 Lock washer
I
M5*30 screw
J
M5*15 screw
K
M6*30 screw
L
M6*15 screw
M
M8*30 screw
N
M8*15 screw
Beam
Beam
Join plate
Left monitor bracket
Right monitor bracket
3. Installation and operation instructions
Note: please read the instructions carefully before installation!
Step 1:
Assemble the wall dead plate. Screw 4 bolts to get through the
washer and the mounting hole in the beam to the thread holes
of the side jointing plate.
The wall dead plate should be symmetrical and balanceable
and the bolts should be screwed down.
ELCART DISTRIBUTION SPA via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY
Tel. +39 02.25117310 Fax +39 02.25117610 sito internet: www.elcart.com
La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.
The divulgation of data contained on this technical sheet are exclusively for informational reasons and establish no link on behalf of Elcart regard to thr performances and the usa of the product.
La divulgacion de los datos contenidos en esta ficha son un servicio unicamente informativo y no constituyen ningun vinculo de parte de Elcart respecto a las prestaciones y uso del producto.
ELCART
Manuale di istruzioni/Scheda tecnica
ART. 12/23052-00 Black color
75 kg.
30"÷64"
0°÷-10°
3.9 kg.
50mm
Name of part
Material
Standard part
Standard part
Standard part
PA
Standard part
Standard part
Standard part
Standard part
Standard part
Standard part
Standard part
Standard part
Standard part
Standard part
Q215
Q215
Q215
Assembled part
Assembled part
Amount
6
6
4
4
6
4
4
4
4
4
4
4
4
4
1
1
1
1
1
Step 2:
Use the wall plate as a templet to drill six holes of Ø 10mm
diameter and 50mm depth in the concrete wall or the hard wood
wall.
Drill four holes upside and two holes downside according
to installtion site.
Then wedge six plastic concrete anchors into the holes.
PAGINA 3 DI 6
e-mail: [email protected]
