Connecting The Regulator - Beuchat Masterlift Junior BCD Manual Del Usuario

34 > Instructions for use / Implementation

2 - Connecting the regulator:

The BC is manually inflated using the power inflator; this
power inflator may also be referred to as a direct-
system. The power inflator is supplied with air at
intermediate pressure by a tube attached to the first
stage of the regulator and connected to the power
inflator by a quick connector.
A > Connecting the regulator's first stage:
•Undo one of the intermediate pressure valves
(see figure 4) on the first stage.
•Ensure that the screws are compatible (3/8'' - 24 UNF).
•Screw the hose into place (see figure 5) and tighten,
but not excessively, with a size 14 flat spanner.
•After you've connected the regulator to the tank, open
the air flow and ensure that there are no leaks.