Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Technical Specifications
MG1309
Model No.
MG1309M
Rated power input
Rated voltage
No-load speed
Max collet diameter
Level of sound pressure measured
A weighted level LP: 72 dB
Rated operating time: ON for 30 mins, OFF for 30 mins.
OPERATION INSTRUCTIONS
Your rotary tool has been designed for Drilling, Cutting, Sanding, Grinding, Routing and
Polishing of Wood, Metal, Plastic and Stone. The tool is designed for light work, such as
engraving, model making, hobby work etc. The tool should not be used for 'heavy' work
otherwise damage may result.
ALW AYS UNPLUG THE TOOL BEFORE FITTING/CHANGING
ACCESSORY OR REPLACING THE COLLET
Fitting an accessory
collet nut.
Replacing the collet
When using an accessory with a smaller or
larger shaft, i.e: drills, you will need to change
the collet as detailed below:
Fitting a cutting/sanding disc.
disc may crack, see dia 5 & 6.
MG1309-6(ISRAEL Plug)
MG1309-4
220-240V~50/60Hz
10000-32000/min
2.3mm,3.2mm
Sound power level LW: 85 dB Vibration does not exceed: 0.5m/s
lightly
tighten the collet
(See dia 4)
Dia. 5
5|English
MG1309-8(BS Plug) MG1309S(SAA Plug)
130W
UMG1309
130W
110-120V~50/60Hz
10000-32000/min
3/32˝,1/8˝
Dia. 2
Dia. 3
r tighten, otherwise the
Dia. 6
MG1309P
130W
220-240V~60Hz
10000-32000/min
2.3mm,3.2mm
2
Dia. 4
Tabla de contenido
