Kunft KGS4503 Manual De Instrucciones página 8

Connection scheme for LPG
Connector
Gasket
Hose inlet
Clips
Flexible hose
Correct Wrong
WALL FIXING
(*) Optional
Before using the stove, in order to ensure its safe use, fix it to the
wall using the chain and hooked screw supplied. Ensure the hook is
screwed into the wall securely
WARNING!
In order to prevent the stove from tipping over, you will need to secure
the stove according to the instructions for installation.
Connection scheme for NG
Connector
Gasket
Hose connection
Gas hose
Correct Correct
14
free standing gas
USAGE
Before using the stove, remove all flammable tapes, Styrofoam
or any other packaging materials. Also remove the user manual
and other flammable materials from inside of stove.
Using the stove's gas burners:
1. The knob frame or the command panel use a flame symbol to
indicate which burner corresponds with which knob.
Push forward and turn the corresponding
knob in a counter-clockwise direction to the max.
To turn off the burner, turn the corresponding knobs clockwise
until it stops.
Shown on the knob are different
symbols for off as , maximum flame as
as .
2. If your stove is equipped with gas burners, an appropriate knob
should be used in order to ignite the burners.
3. In models with a Gas Security System, when the stove flame is
extinguished, a control valve cuts off the gas automatically. To
operate the gas burners with a gas security system, press the
knob and turn it counter-clockwise. After ignition, wait nearly
5-10 second for gas security systems to activate. If the burner is
extinguished for any reason, close the gas control valve and wait
a minimum of one minute before trying again.
EN
KGS4503
KGS4504
(+) symbol.
and minimum flame
15