Product Usage - Kunft KGS4503 Manual De Instrucciones

2.2. Product usage

This user manual is prepared for more than one model. Some of
the features specified in the Manual may not be available in your
appliance.
Warning: all our stoves are only for domestic use, not for com-
mercial use.
THIS APPLIANCE SHALL BE INSTALLED IN ACCORDANCE WITH
THE REGULATIONS IN FORCE AND ONLY USED IN A WELL
VENTILATED SPACE. READ THE INSTRUCTIONS BEFORE INS-
TALLING OR USING THIS APPLIANCE
INSTALLATION
GAS CONNECTION
CAUTION: THE STOVE MUST ONLY BE INSTALLED IN A PERMA-
NENTLY VENTILATED ROOM IN COMPLIANCE WITH THE APPLI-
CABLE REGULATIONS.
This stove is not connected to a combustion products evacuation
device. It must be installed and connected in accordance with current
installation regulations. Particular attention must be paid to the
relevant requirements regarding ventilation.
The use of a gas stove produces heat and moisture in the room
in which the appliance is installed. Ensure that the kitchen is well
ventilated: keep naturel ventilation holes open or install a mechanical
ventilation device (mechanical extractor hood).
Prolonged intensive use of the stove may call for additional ventilation,
for example opening of a window, or more effective ventilation, like
increasing the level of mechanical ventilation where present.
12
free standing gas
Connection and Security:
1. Prior to installation, ensure that the local distribution conditions
(nature of the gas and gas pressure) and the stove specifications
are compatible.
2. The stove specifications are stated on the label (or data plate).
3. This stove is not connected to a combustion products evacuation
device. It must be installed and connected in accordance with
current installation regulations. Particular attention must be paid
to the relevant requirements regarding ventilation.
4. Fit the clamp to the hose. Push one of the hose until it goes to
the end of the pipe.
5. For the sealing control, ensure the control buttons in the control
panel are closed, but the gas cylinder is open. Apply some soap
bubbles to the connection - if there is any gas leakage, soap
bubbles will form.
6. The stove should be placed in a well ventilated place and should
be installed on flat ground surface.
7. Re-inspect the gas connection.
8. When placing your stove on its location, ensure that it is at the
counter level. Bring it to the counter level by adjusting the feet if
necessary.
9. Do not pass your stove's gas hose and electrical cable through
heated areas, especially behind the stove. Do not move the gas
connected stove. Given that any force applied shall loosen the
hose, gas leakage may occur.
10. Please use a flexible hose for the gas connection.
11. Connect your stove to an LPG in the shortest way possible and
without any leakage. The min. length is 40 cm and max. is 125
cm.
12. When checking for gas leakages, never use a flame like a lighter,
matches, cigarettes or similar.
Do not close the stovetop lid when the gas burner is on
Caution: glass lids may shatter when heated. Turn off all burners
before shutting the lid.
EN
KGS4503
KGS4504
13