Power Supply; Aux Output - Elta 2957 Manual Del Usuario

TURNTABLE
Top View
Folding lever for the dust cover
1 2
Rear View
10 A U X OU TPU T
9
12
1. Turntable
2. Central spindle
3. 45 rpm adaptor
4. Cue lever
5. Tone arm
6. Speed selector 33 / 45 / 78
7. Locking device for the tone arm
8. Tone arm rest
9. AUTO STOP ON - OFF: Auto stop function of the turntable ON / OFF
10. FM ANTENNA: FM antenna
11. Power cord
12. AUX OUTPUT: Audio output jacks left / right
14.
3
Before the first use, detach
the stylus guard (white
4
plastic cover) by pulling it
5
straight off the front of the
6
cartridge in the direction
7
of the arrow.
8
11
UNPACKING
Take out carefully the device from the packing. Please keep the packing for further use. Remove all
adhesive strips.
The dust cover is separately packed and must be inserted into right folding lever on the rear. The
left space is to insert into the taking in.

POWER SUPPLY

Connect the mains power cable (11) at the rear to a 230 V ~ 50 Hz wall socket.
Warnings
• Ensure the mains power supply corresponds with the specifications on the type label (230 V).
• Do not touch the plug with wet hands.
• Disconnect the device from mains power supply during longer periods of non-use (vacation
etc.).
• To avoid cable damage and resulting dangers always handle the plug and not the cable when
disconnecting from mains power supply.
COMMON OPERATION INSTRUCTIONS
On / Off
To turn on the device press the button POWER (1) at the front. The POWER indicator (1) lights red.
The background light of the frequency scale lights up in blue. To turn off the device press POWER
(1) again, the blue background light turns off.
Changing of the operation mode
Select the mode with the function selector (3) at the front. Set RADIO for radio operation or PHONO
for turntable operation.
Connections
The operation of the device is easy, except for the mains power cable no connections are to be
made.
Antenna
For better FM reception uncoil the FM wire antenna (10) at the rear of the unit.
For better AM reception the unit has to be directed (built-in ferrite antenna.
Headphones
For private listening connect headphones with an impedance of least 8 ohms (not supplied) to the
3.5mm headphones jack (9) at the front. The speakers are automatically muted.
Balance
Adjustment of the volume ratio between the right and left stereo channel.
Under normal listening conditions and with the operation of identical loudspeakers the balance
automatic control (8) is to be set to the central position. A clockwise rotation of the control means
increasing the volume of the right channel and in reverse.
15.