Kenmore 116.35922 Manual Del Propietário página 21

Reviewthistableto finddo-it-yourself solutions for minorperformance problems. Anyservice
needed, o therthanmaintenance d escribed in this Owner's Manual, s houldbeperformed by a
Searsor otherqualified serviceagenL
WARNING
Disconnect electrical supply before performing maintenance to the vacuum cleaner,
Failure to do so could result in electrical shock or personal injury.
........................... i.._..,.ala.6=ll.,i i i '
: RoBLE I
VacLlum cleaner
won't run.
Poor job of dirt
pick-up.
: t
2,, Tripped circuit breakertbiown fuse 2,
at household service panel
3. Thermal protector lripped 3_
4, Defective wall oullet 4_
5.. Handle screw not tight 5°
I. Full or clogged dust bag. 1,
2, Wrong pile height setting. 2,
3. Worn agitator, 3,
4, Clogged nozzle or bag holder. 4,
1. Unptugged at wall outlet
5,
6.
7,
8.
9,
IO,
Clogged hose. 5.
Hole In hose. 6.
Broken/misplaced bell 7.
Hose not Inserted fully. 8.
Motor protection system activated° 9,
Dirty filters, 10,
Plug in firmly, select the desired set-
ringon the touchcontrol
Reset circuit breaker or replace fuse
Allow vacuum cleaner to cool, then
reset thermal protector
Check with a good appliancellamp.
have properly serviced
Tighten screw
Change bag.
Adjust setting.
Replace agitator.
Check CLOG REMOVAL.
Check for clogs-
Replace hose.
Replace/fix belt.
Insert hose fully,
Check for clogs.
Clean or change motor safety filter
and exhaust filter.
Vacuum Cleaner picks up 1 Wrong pile height setting 1. Adjust setting
moveable rugs or
pushes too hard.
Light won't work. 1. Burned out light bulb 1. Change light bulb
Agitator does not turn. 1. Handle in full upright position 1. Move handle from upright posilion
2. Agitator Overload tripped 2. Reset Agitator Overload
3,, Thermal protector tripped 3. Altow vacuum cleaner to coot 40-50
minules
Airflow restricted 1- Attachment use restricts air flow, 1. Check ATTACHMENTS for fuzz, lint,
with attachment use pet hair or other debris
Sound changes. 2. New carpet fuzz clogged air path 2. Check CLOG REMOVAL and clean
hose
Difficulty adjusting pile 1. Vacuum cleaner not in proper upright 1. Place vacuum cleaner in the locked
height setting position upright position, Iift the vacuum
cleaner back slighlty and adjust pite
height
21