Kenmore 116.35922 Manual Del Propietário página 19

WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
performing maintenance to the vacuum
cleaner. Failure to do so could result in
electrical shock or personal injury from
the vacuum cleaner suddenly starting,
TO REMOVE LIGHT BULB
1. Disconnect power cord from electrical
outlet.
Flat
2. Press hart-
Screwdriver
die release
pedal and lay
vacuum clean-
er back.
3. Pry light
lens out at
slots as shown
He_dllght on
both sides.
Lens
Rotate lens up
and lift off_
CAUTION
Do not use a bulb rated over 9W (13V)_
During extended use, heat from the
bulb could overheat surrounding plas-
tic parts.
4. Remove the light bulb
by pulling straight out.
5. To replace the light
bulb carefully insert _
fully into sloL _
Note; See PARTS AND FEATURES for _t_:;_._
bulb number.
Do not plug in or turn on until the vacu..
um cleaner is completely reassembled.
lens, place tab at front _
of iens into slot. Rotate
lens down and firmly
snap into place.
Hinge Pin
Hole --
Hinge Pin -
Hole
Dust Bag Cover
Hinge Pin
Cover
_ Dust Bag Cover
Hinge Pin
To reinstall or replace dust bag cover.
1. Align dust bag cover hinge pin with
hinge pin hole in dust container.
2. Rotate dust bag cover into place,
3. You should hear a noticeable click
when hinge pin snaps into place.
19