Idiomas disponibles
Idiomas disponibles
18
61. Connect 10 way connector (1) into
mirror assembly.
62. Place lower cover (2) directly under
mirror and push up to install on mirror
(3).
63. Using the motion as shown in the
graphic, install the upper mirror cover
(4).
64. Reverse steps to assemble vehicle.
NOTE: In order for the backup camera to
operate, the vehicle VIN must be
updated with the proper sales
code to reflect the addition of the
added accessory. Refer to
CONFIGURING VEHICLE FOR
INSTALLED BACKUP CAMERA at
the end of the installation
instructions to enable system
functionality.
CONFIGURING VEHICLE FOR INSTALLED BACKUP CAMERA
• Using the DealerCONNECT website and the scan tool, complete the procedure
below:
1. Log on to https://dealerconnect.chrysler.com.
2. In the service tab, inside the Warranty Administration box, locate "Vehicle Option
Updates." Enter the vehicle VIN and add the sales code XAC (Park View Rear
Backup Camera) as a "Dealer Installed Option".
3. Confirm that the new sales code has been successfully added to the VIN.
• With the scan tool connected to both the internet (via Ethernet port or wireless
connection) and the vehicle, perform the following steps:
1. Using the scan tool select the VEHICLE PREPARATION and then select RESTORE
VEHICLE CONFIGURATION.
2. Follow the step by step instructions on the scan tool to complete the Backup Camera
vehicle configuration.
March 5, 2014
www.mopar.com
K6861692AB
