Specifications; Specifications Subject To Change Without Notice - MB QUART Q Serie Instalación Y Funcionamiento

S
PECIFICATIONS
MODEL- Q-Series
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts
4 Load Per Channel
2 Load Per Channel
Dimensions:
Height
Width
Length
Battery Fuse Rating (Amp) External
(Not Supplied)
Signal-to-Noise Ratio
Crossover
Crossover Slope
Crossover Frequency (Multiplier X1)
Crossover Frequency (Multiplier X10)
Frequency Response
Rated Bandwidth
Signal Voltage Adjustment Range (RCA Input)
Input Level Set to LOW
Input Level Set to HIGH
Protection
Input Impedance
These specifications are Amplifier Power Standard CEA-2006 Compliant

Specifications subject to change without notice

14
QAA1000
1000 Watts x 1Ch and ≤ 1% THD+N
1000 Watts x 1Ch and ≤ 1% THD+N
3.75" (9.5cm)
11.75" (30cm)
15.25" (39cm)
200A
>70dB A-weighted (reference: 0dB = 2Vrms)
Selectable HP/AP/LP (High Pass / All Pass / Low Pass)
12dB/octave Butterworth
variable from 50Hz to 500Hz
variable from 500Hz to 5000Hz
0.25Hz to 100kHz (-3dB, 1watt)
20Hz to 20kHz
Variable from 200mV to 2V
Variable from 2V to 20V
Shorted output, DC offset,
thermal, power supply over-current
20k ohms