lumidora 66011 Manual página 4

If you are satisfied with the minimal light output of your light on the dimmer, you don't have to change this
setting. If you want the minimum light output to be lower or higher (for example if your light flickers when it
is on the maximum dimming level), you can follow the procedure below:
Step 1: Switch the light on
Step 2: Press the Sw1 button once with a small pointy object (a screwdriver, for example).
Step 3: The light will now automatically go to a 50% dimming level. Rotate the button on the dimmer switch back to
the maximal dimming level (the lowest light output) that you want to achieve.
Step 4: Press the Sw1 button again to set the minimal light output of the dimmer. The light will now go back to its
maximum light output.
Please note: Complete this procedure within 15 seconds. If you don't, the dimmer will not save the desired setting
and will go back to its previous setting. You then have to go back to Step 2.
Item 66011
Adjust the minimal dimming load:
NL-Handleiding pagina 1-2
UK-Manual page 3-4
DE-Gebrauchsanweisung seite 5-6
FR-Manual page 7-8
ES-Manual página 9-10
4