Hobot 388 Manual Del Usuario página 21

(2) Switch off HOBOT in a safe area.
◎UPS (Uninterrupted Power System)
(1) The UPS supplys power when there is power outage. The backup time of the
UPS is 20 mins.
(2) HOBOT will stop automatically, play alert, and flash red and blue light. Please
take down HOBOT from the glass as soon as possible.
(3) The safety rope can be used to pull HOBOT back. Gently pull the safety rope at
an angle close to the glass to avoid it from falling.
◎Cleaning & Maintainance
1. Clean Cleaning Cloth Care Instructions
⚫ Washing under 40°C (104°F).
⚫ Do not bleach.
⚫ Do not use softener.
⚫ Do not tumble-dry.
⚫ Do not iron.
⚫ Do not dry clean.
Care Frequency: After each use.
Please contact a local retailer or local authorized dealer for additional
consumable spare parts.
2. Replace the water tank
(4) Use a Philips screwdriver to uncrew the water tank.
(5) Disconnest the cable from the old water tank and
then slide out the water tank.
(6) Connect the new water tank to HOBOT and slide
the tank back, then fasten the screw.
Care Frequency: When ultrasonic nozzle is clogged
and cannot spray water.
Please contact a local retailer or local authorized
dealer for additional consumable spare parts.
3. Replace the ultrasonic spray nozzle
(4) Follow above istructions to disattach the water tank.
(5) Lightly lift up the silicone ring and remove it from
the water tank. Don't press the welding spot
and/or ultrasonic nozzle.
(6) Place the new ultrasonic spra y nozzle on the
SmartBot HOBOT – www.hobot.es
- 19 -