Safety Procedures - Hobot 388 Manual Del Usuario

4. Safety procedures

(4) For windows with no balcony, a warning area must be established on the
ground below to prevent people from coming near it.
(5) Please check if the safety rope is broken or the knot is loose
(6) Fasten the safety rope and tie to an indoor fixture before using HOBOT.
5. Fill the Water Tank
Fill the water tank only with pure
water or HOBOT window
detergent to the "MAX" line and
tighten the tank lid fully.
6. Put HOBOT onto the glass
(4) Turn power switch on. Make sure fan is running.
(5) Put HOBOT onto the glass and keep 10cm away from the edge.
(6) Check if HOBOT is sticking to the glass before releasing it.
7. Cleaning with Auto Mode and Manual Mode
(4) Press or
(5) Press or
(6) Press
8. Finish and Remove HOBOT from Glass
(1) Hold the safety rope with one hand and grasp HOBOT tightly with the other
hand to remove HOBOT off the glass.
or , HOBOT will automatically clean the entire window.
to stop HOBOT.
to manually control the HOBOT's moving direction.
SmartBot HOBOT – www.hobot.es
- 18 -