LevelOne WBR-3600 Guía De Instalación Rápida página 6

4. Connect the supplied ADSL cable from the WAN port
on the WBR-3600 (the RJ11 port) to the ADSL
terminator provided by your phone company.
5. Connect the supplied power adapter to the WBR-
3600. Use only the power adapter provided. Using a
different one may cause hardware damage.
6. Ensure the WBR-3600 is powered ON, start your PC.
If it is already started, restart it to ensure it obtains an
IP Address from the WBR-3600's DHCP Server.
7. Check the LEDs.
• The PWR LED should be ON.
• For the LAN (PC) connection, one of the LAN LEDs
should be ON (provided the PC is also ON.)
• The WLAN LED should be ON.
• The DSL LED should be ON if ADSL line is connected.
• The NET LED may be OFF. After configuration, it
should come ON.
8. Start your WEB browser. In the Address box, enter
the following:
http://192.168.0.1