Enlaces rápidos
INSTRUCTIONS
✰✫✌
1. Insert cross braces ✚✌ into ladder frames ✛✌
and push downwards to secure.
2. Fit toe plate ✕✙✌ to the frame using bolt ✕✜✌
nut ✕✛✌ washer ✕✚✌ and tighten securely.
3. Place strenghening brace ✕✔✌ into lowest cross
brace ✚✌ using bolts ✜✌ to secure to ladder
frame.
4. Insert axle ✕✘✌ into the ladder frame upper
hole placing 2 washers ✕✖✌ on the axle in
between the ladder frames, push axle through
2nd frame then secure washers against ladder
frame using 2 split pins ✕✕✌.
5. Place wheels on axle, put washers ✕✖✌ onto
each stub axle and secure with split pins ✕✕✌
6. Insert handle ✕✌ into the top of ladder frames
and secure with bolts ✖✌ steel washers ✗✌
spring washer ✘✌ and dome nuts ✙✌.
✰✫✌
HEAVY DUTY PLASTIC SACK TRUCK
✯✌
DIABLE A SACS EN PLASTIQUE DE HAUTE CAPACITE
✷✵✌
KUNSTSTOF STEEKWAGEN VOOR ZWAAR GEBRUIK
✭✌
KUNSTSTOFF-SACKKARRE FÜR SCHWERE LASTEN
✮✌
CARRETILLA PLÁSTICA PARA SACOS, USO PESADO
56445
CONTENTS
✕✌ Handle
✖✌ Bolt ø 6x45mm
✗✌ Steel washer ø 6mm
✘✌ Spring washer ø 6mm
✙✌ Dome head nut ø 6mm
✚✌ Cross brace
✛✌ Side frame
✜✌ Brace bolt ø 6x12mm
✢✌ Bolt ø 10x40mm
✕✔✌ Extra strengthening brace
✕✕✌ Pin ø 6x20mm
✕✖✌ Steel washer ø 16mm
✕✗✌ Pneumatic wheel 10x3.5"
✕✘✌ Axle ø 6x440mm
✕✙✌ Toe plate
✕✚✌ Steel washer ø 10mm
✕✛✌ Hex. bolt with spring washer & nut
✕✜✌ Bolt ø 10x45mm with plain & spring washer
DST 4
QTY
1
4
4
4
4
4
2
1
1
1
4
4
2
1
1
4
4
4
04/99
Resumen de contenidos para Draper DST 4
- Página 1 ✷✵✌ KUNSTSTOF STEEKWAGEN VOOR ZWAAR GEBRUIK ✭✌ KUNSTSTOFF-SACKKARRE FÜR SCHWERE LASTEN ✮✌ CARRETILLA PLÁSTICA PARA SACOS, USO PESADO 56445 DST 4 INSTRUCTIONS ✰✫✌ CONTENTS 1. Insert cross braces ✚✌ into ladder frames ✛✌ ✕✌ Handle and push downwards to secure.
- Página 2 ✯✌ MODE D'EMPLOI CONTENU ✕✌ Poignée 1. Insérez les entretoises ✚✌ dans les supports latéraux ✛✌ et poussez-les ✖✌ Boulon Ø 6 x 45 mm vers le bas pour bien les fixer en place. ✗✌ Rondelle d'acier Ø 6 mm 2.