Hotpoint HME02GGM Manual Del Proprietário página 10

Installation Instructions
REVERSING THE DOOR POSITION: HME03GGM
WARNING
Follow all steps when reversing the
door swing. Failure to follow these instructions, leaving
off parts, or overtightening screws, can lead to the door
falling off and result in injury and property damage.
• Ensure the appliance is unplugged and empty.
• Adjust the two leveling legs to their highest position.
• We recommend you have someone assist you.
TOOLS REQUIRED
• 10 mm socket screw driver
PARTS INCLUDED
2. Leveling Legs
4. Bottom Hinge Bracket
NOTE: To take the door off, it is necessary to tilt the
appliance backward. You should rest the appliance on
something solid, e.g. a chair, just below the top panel.
damage the coolant system.
1.
appliance door upward to remove.
2.
unscrewing the mounting screws.
10
3. Install the leveling leg, door stopper, and bottom hinge
bracket on the opposite bottom side. Tighten the
screws on the door stopper and bottom hinge bracket.
4.
upper hinge bracket on the opposite side and check to
make sure the door/hinge is moving smoothly. Tighten
hinge cover and right side screw covers. Tighten the
hinge cover screw.
5.
vertically, and that the seals are closed on all sides
before finally tightening the upper hinge screws and
49-60799-2