MoJack WorkBench Instrucciones De Montaje página 6

Operating Instructions for use with MoJack PRO
STEP 1
Move push mower onto sleds
• With the carrier arm fully lowered, lift the front
end of the push mower onto the sleds and
then move the push mower so that the front
wheels of the push mower are touching the
front of the sleds.
• Secure the push mower to the sleds by
attaching the Clevis Pin and Hair Pin
5 6
as shown.
Front wheels
touching front
of sled
STEP 2 (Optional)
With the WorkBench inserts secured between
the sleds. Place desired object to be lifted
onto the inserts.
WorkBench Insert
MoJack WorkBench
Clevis Pin 5
6 Hair Pin
10
Operating Instructions for use with MoJack PRO
STEP 3
Raising the Mower
• Raise the mower by rotating the Winch Handle clockwise.
Do not attempt to lift more than 200 lbs.
The MoJack must be used on a solid level surface.
The mower engine must be turned off.
If using the WorkBench Inserts, do not install past safety sticker.
STEP 4
Locking Carrier into the Safety Ratchet
• As the Carrier raises, the clicking sound indicates that the
Safety Ratchet is functioning properly. Once the mower is
at the desired working height, rotate the Winch Handle 1/2
turn counterclockwise to release the tension off of the
Lifting Strap and allowing the Carrier to rest firmly on the
Safety Ratchet.
STEP 5
Lowering the Mower
• Turn the Winch Handle 1/2 turn clockwise and squeeze the
Grip Handle and Ratchet Release Handle together. Keeping the
Grip and Ratchet Release Handles squeezed together, turn the
Winch Handle counterclockwise until the Wheel Pads are firmly
on the ground.
WorkBench Insert
MoJack WorkBench
Winch Handle
Safety Ratchet
Grip Handle
Ratchet
Release
Handle
11
1/2 Turn
Winch Handle
Lifting Strap
1/2 Turn
Winch Handle
Winch Handle