Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Assembly Instructions for use with MoJack EZ
STEP 1
Remove MoJack WorkBench from package.
Inventory items to be certain all parts and hardware
are present. If any parts or hardware are missing,
please contact MoJack at 1-877-575-3173 or
email us at [email protected].
STEP 2
Slide the Left and Right Sleds
and
into
1
2
the Lift Arm and secure with Push Pins that are
used to secure the wheel pads of the MoJack
as shown.
NOTE: Use with a MoJack XT
requires installation of Sled Inserts.
Please see Assembly Instruction
for use with MoJack PRO,
Step 2 (page 9) for Sled Insert
installation instructions.
Left Sled 1
STEP 3 (Optional)
Place the WorkBench Inserts
3
onto the
Left and Right Sleds
and
as shown.
1
2
MoJack WorkBench
Push Pin
Push Pin
Lift Arm
Right Sled 2
3
WorkBench Inserts
6
Assembly Instructions for use with MoJack PRO and MoJack XT
STEP 1
Remove MoJack WorkBench from package.
Inventory items to be certain all parts and hardware
are present. If any parts or hardware are missing,
please contact MoJack at 1-877-575-3173 or
email us at [email protected].
STEP 2
Slide Sled Inserts
Sleds
1
and
using Cap Screws
Nylock Nuts
as shown.
STEP 3
Slide the Left and Right Sleds
the Lift Arm and secure with Push Pins that are
used to secure the wheel pads of the MoJack
as shown.
STEP 4 (Optional)
Place the WorkBench Inserts
Right Sled 2
Left and Right Sleds
Left Sled 1
MoJack WorkBench
onto
4
2
, and secure
7
and
8
and tighten
8
Nylock Nut
Left Sled 1
and
into
1
2
Left Sled 1
onto the
3
and
as shown.
1
2
7
7
Cap Screw
4
Sled Insert
Nylock Nut 8
Right Sled 2
Push Pin
Push Pin
Lift Arm
Right Sled 2
WorkBench Inserts 3
Right Sled 2
Left Sled 1
Tabla de contenido
