Plugging In The Power Cord And Switching On The Appliance; Storing And Transporting The Appliance; Cleaning And Maintenance; Emptying The Dust Compartment - Rowenta COMPACT FORCE Multi-Cyclonic RO78 Serie Manual Del Usuario

EN
USE
2 • Plugging in the power cord and
switching on the appliance
Unwind the power cord completely, plug in your vacuum
cleaner and press the ON/OFF button (fig. 8).
ATTENTION: do not operate your vacuum cleaner
without the filtration system fitted (foam, microfilter and
filter).
Set the suction power using the manual power switch* on
the power nozzle (fig.9):
• Position (MIN) for vacuuming delicate fabrics
(curtains, textiles).
• Position (Medium) for daily vacuuming of all types
of surfaces with low levels of soiling.
• Position (MAX) for vacuuming hard floors (tiled
floors, parquet, etc.) and rugs and
carpets in the case of high levels of soiling.

CLEANING AND MAINTENANCE

The air we breathe contains particles that can be allergenic: larva
and dust mite faeces, mould, pollen, smoke and animal waste
(hair, skin, saliva, urine), etc.
The finest particles can penetrate deep inside the respiratory
system or can cause inflammation and affect the entire
respiratory system.
(H)EPA ([High] Efficiency Particulate Air Filter) filters retain the
finest particles.
Thanks to the (H)EPA filter, the air released into the room is
cleaner than the air suctioned.
IMPORTANT: always switch off and unplug your vacuum
cleaner before cleaning or servicing. Check and clean your
vacuum cleaner and the different filters regularly.
IMPORTANT: do not operate your vacuum cleaner
without the filtration system fitted (foam,
microfilter and filter).
1 • Emptying the dust compartment (5)
After each use, empty the dust compartment as follows:
Take the dust compartment by the handle and remove it (fig.15).
Separate the fine dust compartment (5b) from the main
compartment (5a) (Fig.16).
Empty the main compartment over a dustbin (Fig.17) then
empty the fine dust compartment (5b) (Fig.18).
Clean the compartment seals using a cloth.
Reposition the fine dust compartment on the main
compartment (Fig.19) then put the dust compartment back into
place (fig.20).
IMPORTANT: do not use the vacuum cleaner once the
maximum level (6) is reached on the dust compartment.
* According to model: these systems are specific to certain mo-
dels or are accessories available as an option.
3 • Storing and transporting the
appliance
After use, switch off your vacuum cleaner by pressing the
ON/OFF button and unplug it (fig. 10). Wind the power cord
by pressing the power cord wind button (fig. 11).
It is easy to carry your vacuum cleaner using the handle (8).
Do not carry your appliance using the dust compartment
handle (fig.12).
When storing your vacuum cleaner, place the tube in its
storage compartment at the back of the appliance (fig.13).
You do not need to remove the accessory support* to store
the accessory range (Fig.14).
2 • Cleaning the black foam filter
(18a)
IMPORTANT: clean the black foam filter every 6 months or
when the suction is no longer satisfactory.
Press the cover release button (fig.21). Tip the cover
backwards (fig.22).
Remove the black foam filter (fig.23) then wash and squeeze
it (fig.24). Leave to dry for at least 12 hours before refitting.
ATTENTION: let the black foam filter dry completely
and make sure it is completely dry before placing it
back in the appliance.
Reposition the black foam filter and close the cover.
3 • Cleaning the microfilter (18b)
IMPORTANT: clean the microfilter every 6 months.
Press the cover release button (fig.21). Tip the cover
backwards (fig.22).
Remove the filtration cassette (18) then separate the black
foam filter (18a) from the microfilter (18b) (fig.25).
Wash the microfilter (fig.26). Leave to dry for at least 12
hours before refitting.
ATTENTION: let the microfilter dry completely and
make sure that it is well dry before refitting on the
appliance.
Reposition the black foam filter and close the cover.
12