Pleasant Hearth LS-B4 Manual De Instrucciones página 4

ASSEMBLY INSTRUCTIONS
1.
Slip two log brackets (A) onto the opposite ends of
a pre-cut wooden 2 x 4 (not included). This makes
up the depth of the log rack. Thread one screw (AA)
through each pre-drilled hole in the log brackets (A)
and secure into the 2 x 4.
Repeat the bracket installation with the other 2 log
brackets (A) and the second 2 x 4 cut to the
same size.
Hardware Used
AA
Screw
2.
Slip two pre-cut wooden 2 x 4s (not included) into log
brackets (A). These make up the height of the log
rack. Thread one screw (AA) through each pre-drilled
hole in the log brackets (A) and secure into the 2 x 4s.
Repeat the bracket installation with the other two log
brackets (A) and the other two 2 x 4s cut to the
same size.
Hardware Used
AA
Screw
3.
Slip two pre-cut wooden 2 x 4s (not included)
through the rectangular holes in the four log brackets
(A). These make up the length of the log rack.
1
x 16
2
x 8
3
4
AA
A
AA
A
A