Idiomas disponibles
Idiomas disponibles
17. Carefully pull away the seal welt at the front edge
of the door. Reach inside the speaker opening
and press the mounting clip to release the wiring
boot bracket from the front of the door.
18. Carefully pull back the wiring boot cover at the
A-pillar by the door hinge. Using a right-angle
pick tool, press in on four (4) tabs to release the
48-way connector.
19. Press in on the locking tab and flip the retaining
lever open to release the connector. Pull the
connector and wiring boot out from the front
door edge.
9/25/12
7
