Check Oil Level; Technical Specifications; Troubleshooting; Oil Change - Kärcher Grow 154F Manual Del Usuario

Check oil level

Illustration
 Remove the oil filling screw with oil dip-
stick and wipe dipstick clean.
 Insert the oil filling screw with oil dip-
stick all the way into the oil fill opening
and remove. Read the value of the oil
level.
 Fill in engine oil (SAE 10W 30) to the
maximum mark.
(Maximum fill capacity = 0.3 l).
 Screw in oil filling screw.
Faults
There will be no igniting.
Compression too low or
does not exist.
No fuel infeed.
Grow 154F
Cylinder diameter
Piston stroke
Cylinder capacity
Fuel type
Engine oil - type
max. filling volume of engine oil
Spark plug
Subject to technical modifications!
12

Troubleshooting

Cause
Motor switch has been
switched off.
Spark plug is defective or
dirty.
Spark plug is not properly
tightened.
Fuel cock is closed.
No petrol in the tank.

Technical specifications

54
38
87
unleaded vehicle petrol (90 ROZ)
SAE 10 W30
0,3
NGK / Bp6HS
Champion / L66Y
– 5
EN

Oil change

Illustration
 Remove the oil filling screw with oil dip-
stick and wipe dipstick clean.
 Unscrew the oil drain screw and collect
oil.
 Fix in the oil drain screw and tighten it.
 Fill in engine oil (SAE 10W 30) to the
maximum mark.
(Maximum fill capacity = 0.3 l).
 Screw in oil filling screw.
Remedy
Switch on engine switch.
Clean or replace the spark
plug.
Tighten the spark plug.
Open fuel cock
Refill petrol.
mm
mm
cm
3
l