Idiomas disponibles
Idiomas disponibles
•
Signal input: line-in mini-jack 3.5mm x 1
•
Output: headphones mini-jack 3.5mm
•
Power AC 110V~240V 50/60Hz
•
Net weight: 2.4kg
Package content: power supply cable, line-in cable connected to active speaker, speakers
connecting cable
Installation.
Before you begin the installation make sure that the main power switch is in OFF. Place
the speakers such that the active speaker is on the right side. To achieve best stereo effect
listener and satellite speakers should form equilateral triangle (each satellite should be in the
same distance from the listener's ears). Preferably try to put the speakers in such manner that
the tweeter speakers are on the same height as your ears.
1.
Connect the signal cable with the mini-jack 3. mm plug to the appropriate output
port of your sound source (for example output of your PC's soundcard).
2.
Connect the cable from the rear of the active speaker and to the corresponding
socket on the back passive speaker.
3.
Connect the power plug to the electric socket.
4.
Switch main power switch to ON position.
5.
Start playing sound using your connected sound source.
6.
Using the volume knob on the front of active speaker set up desired volume level.
7.
To setup bass and treble use the knobs positioned on the front of the active speaker.
Adjust them to suit your personal preferences. If the sound is distorted, adjust bass
and treble, and volume of the speakers and the device which the sound is played
from.
8.
You may also listen to music via headphones. To connect your headphones use the
mini-jack 3.5mm socket positioned on the front of active speaker.
9.
It is not recommended to set the volume and bass and treble at maximum because
of the diversity that the quality and compression of songs.
Listening to music at maximum levels set both in speakers and audio source, may cause
severe and irreversible damage to the speakers, drivers and electronic components. MO-
DECOM cannot be held responsible for this type of damage and they will be considered as
violation of the warranty terms.
This device was designed and made of high-quality reusable materials and coamponents. If
the device, its packaging, user's manual, etc. are marked with crossed waste container, it
means they are subject to segregated household waste collection in compliance with the Di-
rective 2012/19/UE of the European Parliament and of the Council. This marking informs that
electric and electronic equipment shall not be thrown away together with household waste after it's
been utilised. The user is obliged to bring the utilised equipment to electric and electronic waste
collection point. Those running such collection points, including local collection points, shops or
commune units, provide convenient system enabling to scrap such equipment. Appropriate waste
management aids in avoiding consequences which are harmful for people and environment and
result from dangerous materials used in the device, as well as improper storage and processing.
Segregated household waste collection aids recycle materials and components of which the device
was made. A household plays crucial role in contributing to recycling and reusing the waste equip-
ment. This is the stage where the basics are shaped which largely influence the environment being
our common good. Households are also one of the biggest users of small electrical equipment.
Reasonable management at this stage aids and favours recycling. In the case of improper waste
management, fixed penalties may be imposed in accordance with national legal regulations.
7
