Description Of The Device - V2 TMU100 Manual De Instrucciones

Description of the device

TMU100 is a 433.92 MHz, 100 channel transmitter.
The channels range from number 00 to number 99 and each
channel has the ability to transmit 2 different controls (OPEN or
CLOSE).
Features:
• Rolling transmission code
• Display to select the channels and the programming steps
• Ability to program the favourite channel
• Ability to set the last channel, which can be useful in case you
are not using all 100 channels
• Low battery warning
• Ongoing transmission signal
Operation of keys and display
OPEN OPENING control
CLOSE CLOSING control
- input in programming
MENU
- activation of the favourite channel
NEXT Channel scan UP
PREVIOUS Channel scan DOWN
Blinks when the remote is transmitting
Blinks when the battery requires
replacement
Display the channels in normal operation
and in the programming stages
Active programming
Caratteristiche tecniche
Power supply
Frequency
Range in open field
Max.absorption
Dimensions
Weight
Programming the
FAVOURITE CHANNEL
1. Hold the MENU key for 5 seconds.
The display shows:
2. Press the MENU key: the display shows the number of the
channel currently set as favourite (example
3. Select the desired channel through the keys NEXT and
PREVIOUS
4. Press MENU to store: PROG flashes twice to confirm the
programming of the new parameter then the display will
show again
5. To exit the programming menu wait for 10 seconds without
pressing any key: PROG goes out
To change the favourite channel, repeat the procedure from
the beginning.
Transmission of the
FAVOURITE CHANNEL
To transmit the favourite channel press the MENU key and
immediately after (within 2 seconds) the key OPEN or CLOSE
2 x Lithium 3V (CR2032 230mAh)
433,92 MHz ±75KHz
150 m
< 10 mA
124x52x21 mm
55 g
0 1
)