Mellerware Spring! Manual Del Usuario página 7

FILLING WITH WATER
You must fill the water
–
compartment before turning
on the appliance.
Extract the receptacle from
–
its place.
Open water inlet lid.
–
Fill the receptacle taking care to
–
observe the MAX and MIN level.
Close the lid.
–
Put the container back onto its
–
place.
USE
Attach the appliance to its base
–
/ connector making sure that it is
correctly fitted into place.
Connect the appliance to
–
the mains.
Turn the appliance on, by using the
–
on/off switch.
Once the water has boiled
–
the appliance will switch off
automatically.
The appliance can be switched on
–
again using the switch once the
control device has cooled, if it is
not switched on again, do not force
it, allow it to cool.
ONCE YOU HAVE FINISHED USING
THE APPLIANCE
Unplug the appliance from
–
the mains.
Clean the appliance.
–
CABLE COMPARTMENT
This appliance has a cable
compartment situated on its
underside (F).
CARRY HANDLE
This appliance has a handle (B)
on the upper part of the body,
which facilitates comfortable
transportation.
Cleaning
Disconnect the appliance from the
–
mains and allow it to cool before
undertaking any cleaning task.
Clean the electrical equipment and
–
the mains connection with a damp
cloth and dry. DO NOT IMMERSE IN
WATER OR ANY OTHER LIQUID.
Clean the equipment with a damp
–
cloth with a few drops of washing-
up liquid and then dry.
Do not use solvents, or products
–
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
Neither parts of this appliance
–
are suitable for cleaning in the
dishwasher.
Then dry all parts before its
–
assembly and storage.
HOW TO DEAL WITH LIME SCALE
INCRUSTATIONS
For the appliance to work correctly
it should be kept free of limescale
or magnesium incrustations caused
by the use of hard water.
To prevent this kind of problem,
we recommend the use of water
with low lime or magnesium
mineralisation.
However, if it is not possible to use
the kind of water recommended
EN