Before Use; Heating Mode - Mellerware Cuddly! Manual Del Usuario

position and mark the drilling
points on the wall.
Drill into the wall where marked and
–
insert the rawlplugs. (Fig.2-3).
Place the support by matching the
–
holes with the rawlplugs and screw
in fi rmly. (Fig.4).
Follow the indications of Fig. 5.
–
Make sure that the bracket is fi rmly
fi xed; it should be able to support
twice the weight of the appliance.
Instructions for use

BEFORE USE

Make sure that all products'
–
packaging has been removed.
Some parts of the appliance
–
have been lightly greased.
Consequently, the fi rst time the
–
appliance is used a light smoke
may be detected. After a short
time, this smoke will disappear.
To eliminate the smell given off by
–
the appliance when used for the
fi rst time, it is recommended to
have it on at full power for 2 hours
in a well-ventilated room.
USE
Unroll the cable completely before
–
plugging it in.
Connect the appliance to
–
the mains.
Press the button
–
SET CURRENT DAY/TIME
The fi rst thing to do is to confi gure
–
the day and time you are in. the day and time you are in.
Press the Press the button for 3 seconds. button for 3 seconds.
–
The display will show "d". Press +/-
–
to select the day of the week (1-7):
- Monday (1)
- Tuesday (2)
- Wednesday (3)
- Thursday (4)
- Friday (5)
- Saturday (6)
- Sunday (7)
Press Press to confi rm the day of the to confi rm the day of the
–
week. Then, week. Then, will appear on will appear on
the screen.
Press +/- to select the hour.
–
Press Press to confi rm the time. Then, to confi rm the time. Then,
–
will appear on the screen.
Press +/- to select the minutes.
–
Press Press to confi rm the minutes to confi rm the minutes
–
and fi nish the confi guration.
NOTE: If the appliance is
–
unplugged, the clock and calendar
will be reset to factory defaults.

HEATING MODE

Press Press to select the desired to select the desired
–
heating mode. By pressing
repeatedly, the device will change
mode in this order:
Comfort mode: press +/- to set
Comfort mode: press +/- to set
–
the temperature between 5-35˚C.
ECO mode: press +/- to set the ECO mode: press +/- to set the –
temperature between 1-31˚C.
P1/P2/P3: predefi ned weekly
–
programs.
Anti-freeze mode: the
Anti-freeze mode: the
–
temperature cannot be adjusted
and it is by default 7˚C.
EN ES