Mellerware Cuddly! Manual Del Usuario página 8

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
ESPAÑOL
The appliance is not suitable for
outdoor use.
Do not use or store the
appliance outdoors.
Do not touch the plug with
wet hands.
Do not use the appliance in the case
of persons insensitive to heat (the
appliance has heated surfaces).
Do not touch the heated parts of
the appliance, as it may cause
serious burns.
The temperature of the accessible
surfaces may be high when the
appliance is in use.
USE AND CARE
Fully unroll the appliance's power
cable before each use.
Do not use the appliance if the on/
off switch does not work.
Do not move the appliance while
in use.
Do not use the appliance if it is
tipped up and do not turn it over.
Disconnect the appliance from the
mains when not in use and before
undertaking any cleaning task.
Store this appliance out of reach of
children and/or persons with physical,
sensory or reduced mental or lack of
experience and knowledge.
Do not store the appliance on
areas where the temperature could
be lower than 2˚C.
Never leave the appliance
unattended while in use.
Never leave the appliance
connected and unattended if is
not in use. This saves energy and
prolongs the life of the appliance.
Service
Any misuse or failure to follow the
instructions for use renders the
guarantee and the manufacturer's
liability null and void.
Description
A – Heating bars
B – Control Panel
C – On/off indicator
D – Comfort mode indicator
E – Heater mode indicator
F – ECO mode indicator
G – Screen
H – On/off button
I – Mode select button
J – + button
K – - button
L – Timer button
If the model of your appliance does
not have the accessories described
above, they can also be bought
separately from the Technical
Assistance Service.
ASSEMBLING THE WALL BRACKET
The appliance has a wall bracket
on which it can be supported.
Fix the wall bracket as you think
appropriate, using plugs, screws,
and adhesive...
Taking into account the separation
distances mentioned above, place
the wall support in the required
EN
ES
Tabla de contenido
loading

Tabla de contenido