Supplied Components; Operating Instructions - Flex LRP 1503 VRA Instrucciones De Funcionamiento Originales

Supplied components

Pipe belt sander LRP 1503 VRA
Sanding belt set, each 1 item 40 x 760 mm,
consisting of:
Sanding belt P 80
Sanding belt P 120
Sanding belt P 220
Sanding fleece fine
Sanding fleece medium
Sanding and polishing belt
S 600
Sanding and polishing belt
S 1500
1 plastic carrying case (Part no.: 327.603)
1 operating manual (Part no.: 327.263)

Operating instructions

t^okfkd>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâ=çå=íÜÉ=ÄÉäí=
ë~åÇÉêI=éìää=çìí=íÜÉ=ã~áåë=éäìÖK
Before switching on the power tool
 Unpack the belt sander and check that no
parts are missing or damaged.
 Attach the handle.
Switching on and off
Brief operation without engaged switch
rocker:
 Slide the switch forwards and hold in
position.
 To switch off, release the switch.
16
Continuous operation with engaged
switch rocker:
cçääçïáåÖ=~=éçïÉê=Ñ~áäìêÉI=íÜÉ=ëïáíÅÜÉÇJçå=
ã~ÅÜáåÉ=ïáää=ëí~êí=êìååáåÖ=~Ö~áåK
Part no.:
326.739
326.755
326.771
326.852
326.879
326.917
 Slide the switch forwards and lock into
326.933
 To switch off, release the switch by pressing
Attaching or changing the sanding
belt
 Pull out the mains plug.
 Press the rocker towards the rubber drive
`^rqflk>
position by pressing it at the front.
it at the back.
roller and hold down (1.).
LRP 1503 VRA