Lanaform Aroma Spring Manual De Instrucciones página 7

To clean the reservoir:
1) Clean the reservoir with water using a soft cloth and vinegar if there are foam or limescale deposits on the inside.
2) Rinse the reservoir in clean water.
To clean the silicon tube:
1) Rinse the tube in clean water. Use a few drops of vinegar if there are limescale deposits.
2) Wipe with a soft cloth.
Storage:
After cleaning and drying the device, store it in a dry, cool place out of the reach of children.
BREAKDOWNS AND REMEDIES
In the event of a malfunction, under normal conditions of use, please refer to the following chart:
BREAKDOWNS
No mist.
Mist has an unusual smell.
Low intensity.
The water does not come out of the
fountain.
POSSIBLE CAUSES
If there is no light.
No more water in the reservoir.
The dome is badly positioned.
The temperature of the reservoir is
too low.
The water has been standing in the
reservoir too long.
Too much/little water in the
reservoir.
Sediment on the transducer.
The water is too cold.
The water is not clean.
The silicon tube is not positioned
correctly.
The intensity level of the water is
low.
There are sediments in the tube.
REMEDIES
Check that the device is connected
and no breakdown has occurred in
that area.
Add water to the reservoir.
Reposition it correctly.
Place the reservoir in a room at
ambient temperature for half an
hour prior to use.
Clean the reservoir and pour fresh
water into it.
Empty the water out of the reservoir
or add water to it.
Clean the transducer.
Use water that is at room
temperature.
Clean the reservoir and pour fresh
water into it.
Ensure that the tube is correctly
positioned on both sides.
Increase the intensity level on the
pump.
Clean the silicon tube.
Aroma Spring
EN
7