Care & Maintenance; Legal Notices & Regulatory Information - Elcometer 266 Manual Del Usuario

19 CARE & MAINTENANCE
The gauge incorporates a Liquid Crystal Display (LCD). If the

display is heated above 50°C (120°F) it may be damaged. This
can happen if the gauge is left in a car parked in direct sunlight.
Keep the instrument, high voltage probe handle, connecting

cables and probe accessories clean. Before cleaning, switch off
the instrument and disconnect all cables. To clean, wipe with a
damp cloth and then allow ample time to air dry before use. Do
not use any solvents to clean the instrument.
At regular intervals, check the instrument, high voltage probe

handle, probe and high voltage return leads and connectors for
damage. Replace any parts that are worn or are of doubtful
condition, see Section 16 'Spares & Accessories' on page en-27.
Regular calibration checks over the life of the instrument are a

requirement of quality management procedures, e.g. ISO 9000,
and other similar standards. For checks and certification contact
Elcometer or your Elcometer supplier.
The instrument does not contain any user-serviceable components. In
the unlikely event of a fault, the gauge should be returned to your local
Elcometer supplier or directly to Elcometer. The warranty will be
invalidated if the gauge has been opened.
20 LEGAL NOTICES & REGULATORY INFORMATION
This product meets the Electromagnetic Compatibility Directive and the Low Voltage Directive.
This product is Class A, Group 1 ISM equipment according to CISPR 11.
Group 1 ISM product: A product in which there is intentionally generated and/or used conductively coupled
radiofrequency energy which is necessary for the internal functioning of the equipment itself.
Class A product: Suitable for use in all establishments other than domestic and those directly connected to a
low voltage power supply network which supplies buildings used for domestic purposes.
NOTE: Additional information in given in Section 1 'Working Safely' on page en-2.
Product Description:
Manufactured by:
is a registered trademark of Elcometer Limited, Edge Lane, Manchester, M43 6BU.
R
United Kingdom
All other trademarks acknowledged.
The Elcometer 266 DC Holiday Detector is packed in cardboard and plastic packaging. Please ensure that
this packaging is disposed of in an environmentally sensitive manner. Consult your local Environmental
Authority for further guidance.
www.elcometer.com
Elcometer 266 DC Holiday Detector
Elcometer Limited, Manchester, England.
R
en-34