Bang & Olufsen BeoSound Essence 2nd generation Manual De Instrucciones página 11

260 mm (10.24")
English
Use the correct size and type of screws and wall
anchors – taking into account the construction and
condition of the wall. Use 2 round-head screws with a
diameter of 4 mm (0.16") and wall anchors each with
a minimum load rating of 2.5 kg (5.5 lbs).
Special notice about light partition walls
If you intend to hang the product on a gypsum wall
(also known as drywall or wallboard), the wall bracket
must be fastened to a vertical stud. Mounting was
evaluated for use on a drywall surface.
Use 2 round-head screws with a diameter of 4 mm
(0.16") and a length of 50 mm (2").
1 screw must penetrate the gypsum and be screwed a
minimum of 25 mm (1") into a vertical stud.
Furthermore mount 1 screw and 1 suitable anchor of a
type intended for gypsum walls.
The screws should be tightened until the distance
between the bottom of the head and the drywall
surface is 4 mm (0.16").
BeoSound Essence mk II
11