Idiomas disponibles
Idiomas disponibles
Tabla de contenido
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets
A
B
Metra. The World's Best Kits.
®
Hyundai Tucson
Tucson
KIT FEATURES
• ISO DDIN radio provision
• Painted matte black
MetraOnline.com
/
(with NAV)
2014-2015
(with 4.3" screen)
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
95-7364B
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly . .................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-7304 • AX-HYKIA1-SWC
& AX-HYKIA-SPDIF (for amplified models)
Antenna Adapter: Not required
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 5/8/18 INST95-7364B
Tabla de contenido
Manuales relacionados para Metra 95-7364B
Resumen de contenidos para Metra 95-7364B
- Página 1 Also, do not remove the factory radio with the key in the on position, or while the vehicle is running. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/8/18 INST95-7364B...
-
Página 2: Dash Disassembly
DASH DISASSEMBLY 1. Unclip and remove the trim panel above the radio. (Figure A) 2. Unclip and remove the hazard switch panel. (Figure B) 3. Remove (4) Phillips screws securing the radio. Slide the radio out, then unplug and remove the radio. (Figure C) Continue to Kit Assembly (Figure A) (Figure B) (Figure C) 1.800.221.0932 MetraOnline.com... -
Página 3: Kit Assembly
KIT ASSEMBLY 1. Secure the radio to the radio brackets with the screws supplied with the radio. (Figure A) 2. Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio for proper operation. 3. Secure the radio assembly to the dash using the factory screws. 4. Clip the radio trim panel over the radio assembly, then reassemble the dash in reverse order of disassembly to complete the installation. (Figure A) REV. 5/8/2018 INST95-7364B... - Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/8/18 INST95-7364B...
- Página 5 Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/8/18 INST95-7364B...
-
Página 6: Desmontaje Del Tablero
DESMONTAJE DEL TABLERO 1. Desenganche y quite el panel de la moldura que está arriba del radio. (Figura A) 2. Desenganche y quite el panel del interruptor de las luces intermitentes. (Figura B) 3. Quite los (4) tornillos Phillips que sujetan el radio. -
Página 7: Ensamble Del Kit
(Figura A) 2. Localice el arnés de cableado de fábrica en el tablero. Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. Pruebe el radio para verificar que funcione correctamente. - Página 8 800-354-6782 para obtener más información y avance hacia un futuro mejor. Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP). Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/8/18 INST95-7364B...