Idiomas disponibles
Idiomas disponibles
Thank you for choosing a Sanus Systems VisionMount™ wall mount. The MF110 is designed to mount LCD flat panels with VESA
(Video Electronics Standards Association) hole pattern up to 200mm x 200mm and weighing up to 100 lb [45.5 Kg] to a vertical wall. It will
allow the television to be pulled out 9.5" [241.3 mm] from of the wall. It will allow you to swivel the television ±30° (may vary with size of
television), tilt +5° to -15°, and have a ±6° roll control.
WARNING: If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified
contractor or contact Sanus at 800.359.5520 or www.sanus.com. Check carefully to make sure that there are no missing or defective
parts. Our customer service representatives can quickly assist you with installation questions and missing or damaged parts. Replacement
parts for products purchased through authorized dealers will be shipped directly to you. Never use defective parts. Improper installation
may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified by Sanus Systems. Sanus
Systems can not be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use. Please call Sanus
Systems before returning products to the point of purchase.
Required Tools: Drill, 3/16" drill bit, wrench set, philips screw driver
Supplied Parts and Hardware: Some parts not shown as actual size*
(4) M4 x 12 mm Bolt - C
(4) M4 x 30 mm Bolt - F
(4) M4 Lock Washer - I
(4) M4/M5 Spacer - L
(4) M6 Washer - O
Sanus Systems
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
Assembly Instructions for Model: MF110
(1) Wall Plate - A*
(4) M5 x 12 mm Bolt - D
(4) M5 x 30 mm Bolt - G
(4) M5 Lock Washer - J
(4) M6 Spacer - M
(3) Lag Bolt - P
2221 Hwy 36 West, Saint Paul, MN 55113 05.10.06 (100044)
(1) Arm Assembly - B*
(4) M6 x 12 mm Bolt - E
(4) M6 x 35 mm Bolt - H
(4) M6 Lock Washer - K
(4) M4/M5 Washer - N
(3) Lag Bolt Washer- Q
