Team kalorik TKG SIS 1003 Manual Del Usuario página 15

Fax +32 2 359 95 50

examination and repair. Incorrect re-assembly can cause a risk of
electric shock when the iron or steam tank is used.
Fully unwind the main cord and supply hose before starting to

iron.
The power switch should always be put in position "0" before

plugging or unplugging the power cord from outlet.
Unplug the appliance and allow the iron and the water tank to

cool down before cleaning or storing them and for pressurized
steam iron station (depending on the model) before opening,
filling or emptying the water tank.
FOR PRESSURIZED STEAM IRONING STATION (DEPENDING

ON THE MODEL), NEVER OPEN THE CAP OF THE STEAM
TANK WHILE THE APPLIANCE IS CONNECTED TO THE
MAINS WALL SOCKET AND ESPECIALLY WHEN STEAM IS
BEING PRODUCED.
Please note: Should the symbol

surface, you need to be careful when handling the product. This
symbol means: CAUTION, this surface may get very hot during
use.
The symbol
temperature, however the other metallic or non-metallic surfaces
can also become very hot during use and it is therefore advisable
to always handle them with care and if possible with the help of
isothermal gloves or other thermal protection. In case of doubt
concerning the temperature of a certain surface it is always
preferable to protect oneself.
(*) Competent qualified service: after-sales department of the
producer or importer or any person who is qualified, approved and
competent to perform this kind of repairs in order to avoid all danger.
In case of need you should return the appliance to this service.
FILLING THE WATER TANK OF THE IRON (FOR THE SPRAY FUNCTION)
Use preferably demineralised water. If you want to use the spray button, fill the water tank of
the iron as follows:
1) Unplug the appliance from the outlet to let it cool down.
2) Put the temperature dial to "MIN" and the variable steam dial to the OFF setting.
3) To fill the water tank of the iron, open the lid of the filling opening and pour water using a
measuring cup. Never exceed the MAX mark indicated on the iron. Close the lid of the
filling opening.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
is always put on the surface with the highest
15
Assembly page 15/76
be indicated on a certain
TKG SIS 1003 - 130801