FRAM CF9597A Boletín De Instalación

CF9597A
Installation Bulletin:
Bulletin d'installation :
Boletín de Instalación:
Estimated time of installation:
Temps estimé pour l'installation :
Tiempo estimado de instalación:
Application:
Chrysler Pacifica, Town and Country, Voyager |
Application:
Dodge Caravan, Grand Caravan
Aplicación:
For more application specifics,
please refer to our catalog.
Pour obtenir plus d'information
sur les applications, veuillez
consulter notre catalogue.
Para obtener información
específica sobre la aplicación,
consulte nuestro catálogo.
FRAM Group Operations LLC
Danbury, CT 06810-5109 U.S.A.
©2012 FRAM Group IP LLC
FRAM Group (Canada) Inc.
2430 Meadowpine Blvd.
Unit 105 & 107
Mississauga, ON
L5N 6S2 Canada
SOME VEHICLES MAY DIFFER SLIGHTLY. IF YOU HAVE QUESTIONS
REGARDING THIS FILTER, ITS INSTALLATION OR MORE DETAILS
SPECIFIC TO YOUR VEHICLE, PLEASE VISIT
www.framfreshbreeze.com
FOR HOW-TO VIDEOS AND ADDITIONAL INFORMATION.
CERTAINS VÉHICULES PEUVENT PRÉSENTER DES DIFFÉRENCES. SI VOUS
AVEZ DES QUESTIONS CONCERNANT CE FILTRE, SON INSTALLATION OU
DÉSIREZ OBTENIR PLUS DE DÉTAILS CONCERNANT VOTRE VÉHICULE,
VEUILLEZ VISITER LE www.framfreshbreeze.com POUR OBTENIR
DES DÉMONSTRATIONS VIDÉOS ET PLUS D'INFORMATION.
PUEDE VARIAR UN POCO EN ALGUNOS VEHÍCULOS SI TIENE PREGUNTAS
SOBRE EL FILTRO Y LA INSTALACIÓN O DESEA INFORMACIÓN EN DETALLE
PARA SU VEHÍCULO, VISITE www.framfreshbreeze.com, DONDE
ENCONTRARÁ VIDEOS INSTRUCTIVOS E INFORMACIÓN ADICIONAL.
Importado por:
FRAM Group Operations Mexico City S.A. de C.V. FRAM Group Operations Mexico City S.A. de C.V.
Carretera México-Cuautitlán km 31.5 S/N
Nave 5, Conjunto Industrial Cuautitlán.
Col. Loma Bonita
Cuautitlán, Edo. de México
MEX, C.P. 54800
Tel. 01 800 7154 135
Hecho en China
TOOLS: TOOLS: None required TOOLS:
LOCATION OF CABIN FILTER: Under the dash on the passenger side of the vehicle behind filter access door.
07-10
REMOVE ALL DEBRIS IN AND AROUND FILT RE REMOVE ALL DEBRIS IN AND AROUND FILT MOVE ALL DEBRIS IN AND AROUND FILT MOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.
10 minutes or less
1. The cabin filter is located in a plastic housing below the glove box. You may want to place something on the floorboard to
10 minutes ou moins
10 minutos máx.
catch any debris that may fall out of the filter during removal.
2. Remove the cover from the bottom of the housing. It is held in place by a locking clip that will slide towards the rear of the
vehicle. (Fig 1)
3. The cover and locking clip are two separate parts that snap together. (Fig 2)
4. To remove the old filter, pull straight down and out of the housing. Also, because of the limited clearance between the filter
housing and the floorboard, the filter must bend at about 45 degrees as it slides out. (Fig 3) Note: On some vehicles,
the filter has a tendency to rub against the insulated heater core tubes located in the housing. (Fig 4) This may cause
the filter to snag and be a bit more difficult to pull out. If this occurs, move the filter slightly up and then back down
to release (you may have to do this several times throughout the removal process).
5. Slide the new filter into place making sure that the air flow indicator arrow is pointing towards the driver's side of the vehicle.
The FRAM FRESH BREEZE cabin air filter is manufactured with partial cuts in its sidewalls to allow it to bend. Note: On some
vehicles, the filter has a tendency to rub against the insulated heater core tubes located in the housing. (Fig 4) This
may cause the filter to snag and be a bit more difficult to install. If this occurs, move the filter slightly down and then
slide back up to release (you may have to do this several times throughout the installation process).
6. Replace the housing cover and slide the locking clip toward the front of the vehicle.
ER LOCATION.
1
3
2
4