GE RAK26TO Instrucciones De Instalación

Before you begin - Read these instructions completely and carefully.
IMPORTANT – OBSERVE ALL GOVERNING CODES AND ORDINANCES.
Note to Installer – Be sure to leave these instructions with the Consumer.
Note to Consumer – Keep these instructions with your Owner's Manual for future reference.
Parts Included
• Interior Panel (with insulation)
• Exterior Panel (with printed instructions)
• Screws (4)
• Push Pins (4)
Materials Needed (Field Supplied Parts)
• Phillips Head Screw Driver
• 5/16" Driver (To loosen screws on Rear Grille)
STEP 1:
Installation of Exterior Panel
For RAB46A and RAB48B wall sleeve models
screws, that secure the rear grille to the wall sleeve, 1
complete turn.
2. Place black outdoor cover inside wall sleeve against
3. Insert the middle tabs at the top, bottom and sides
of the sleeve and the outdoor grille to seal out wind
and water.
Insert these four tabs between the rear
GE is a trademark of the General Electric Company. Manufactured under trademark license.
Tabs
Installation Instructions
for your new
RAK26TO
Tenant Option Kit
For AJ Series, RAB46*, RAB48*,
RAB26* Wall Sleeve
Interior Panel
STEP 1 (cont):
Installation of Exterior Panel
For RAB46A and RAB48B wall sleeve models
retighten the 2 grille screws to secure it in place.
31-5000497 Rev. 0 02-21 GEA
Exterior Panel