Yale HTP Serie Manual De Instrucciones página 19

19
The load must not be moved into areas which are not visible to the operator. If necessary, he
must ensure he is given help.
The unit must never be operated with more than the power of a person.
Welding work on the unit is prohibited. The unit must never be used as a ground connection
during welding.
Side pull, i. e. side loading of the side plates and/or the load bar is forbidden. The trolley must
be perpendicular above the load at any time.
S
A unit changed without consulting the manufacturer must not be used.
Do not use the hoist for the transportation of people.
Incorrect attachment to or incorrect loading of the clevis load bar, i. e. applying load to the
"flat" side of the suspension eye, is forbidden.
Enlarging the adjusted trolley width, e. g. to enable the trolley to negotiate smaller curve radii,
is forbidden.
Only units fitted with hooks with safety latches must be suspended in the clevis of the load bar.
Make sure that the hook is not too large. The clevis must be seated centrally in the saddle of
the hook and the hook must be freely articulating in the clevis at the same time.
Only one load lifting attachment or hoist may be suspended in the clevis of the trolley load bar.
Never reach into moving parts.
©
2015 Columbus McKinnon Industrial Products GmbH