Eldom COLUMBIA VAC WNC10 Manual De Instrucciones página 12

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
- use the buttons on the control panel or the remote control to activate the desired feature.
- press the "OFF" button to turn the appliance off
HUMIDIFICATION
- Press the "MIST" button – the "E" indicator light will light up
- use the regulator (10) to set humidification intensity
- if there is no water in the container, a beep will sound the "F" indicator light will start flashing
- press the mist button again to turn off humidification
FEATURES
ViBrations
the feature can only be activated when the device is turned on.
- press the SWING button – the "D" indicator light will light up
- press the SWING button again to turn off vibrations
timer – automatic switch-off
this feature can be used to set the time after which the appliance will be automatically turned off.
the feature can only be activated when the device is turned on. only full hours in the 1-7 range can be selected.
press the button on the remote control:
- once – automatic switch-off in 1 hour – the "C" indicator light will light up,
- 2 times – switch-off in 2 hours – the "B" indicator light will light up,
- 3 times – switch-off in 3 hours – the "B" and "C" indicator lights will light up,
- 4 times – switch-off in 4 hours – the "A" indicator light will light up,
- 5 times – switch-off in 5 hours – the "A" and "C" indicator lights will light up,
- 6 times – switch-off in 6 hours – the "A" and "B" indicator lights will light up,
- 7 times – switch-off in 7 hours – the "A", "B" and "C" indicator lights will light up,
natural – natural mode
- use the "ON/SPEED" button to select fan speed,
- press the "MODE" button once – the "H" indicator light will light up
- depending on the selected speed, the fan will vary rotations in cycles, from the selected speed
down to switch-off.
- you can adjust the speed, when the NATURAl feature is active,
- press the "MODE" button twice to turn off this feature
sleeping
- use the "ON/SPEED" button to select fan speed,
- press the "MODE" button twice – the "G" indicator light will light up
- depending on the selected speed, the fan will vary rotations in cycles, from the selected speed
down to switch-off. After 30 minutes, the working speed will be automatically reduced, and the
appliance will operate at the lowest speed.
ClEANING AND MAINTENANCE
- Before cleaning the appliance, disconnect it appliance from the mains.
- it is recommended to clean the water tank and the base on a regular basis.
- Do not immerse the appliance in water or any other liquids.
- Do not use aggressive cleaning agents.
- some deposits may accumulate in the base or the ultrasonic converter. to remove the deposits, rinse these elements with
spirit vinegar for 30 minutes. Do not let the converter come in contact with any sharp items.
GUARANTEE
- the device is intended for private household use,
- it may not be used for professional applications,
- the guarantee shall become void if the unit is improperly operated.
12
EN
Tabla de contenido
loading

Tabla de contenido