General Information; Technical Data; Getting Started - Eldom alta DA300 Manual De Instrucciones

OPERATING INSTRUCTION
EN
STEAM STATION DA300

GENERAL INFORMATION

1. Power cord
2. Steam cord
3. Handle
4. Indicator light
5. Temperature dial
6. Continuous steam button
7. Shot of steam button
8. Iron lock
9. Main house
10. Water tank
11. Cord pocket
12. Iron
13. Soleplate
14. Steam holes
15. Water inlet
16. Limescale filter

TECHNICAL DATA

- power: 2400 W
- supply voltage: 220-240V, ~ 50Hz
- steam jet: 50 g / min
- steam pressure: 2,5 bar

GETTING STARTED

Before using the iron for the first time, fully unwind the power cord (1)
and the steam cord (2).
You may notice an odour from the unit on first use. This is normal and
will cease after a short period of time.
Place the unit on a stable, hard, horizontal and heat-resistant surface.
Do not place the device on an ironing board cover or soft surface.
The main house (9) must at all times be positioned underneath
the iron (12). Otherwise, the steam will not be able to reach the
iron (12) freely.
Make sure that the device is unplugged and cold, the temperature dial
(5) is on "MIN" and the continuous steam button (6) is on "
Make sure that the iron (12) is not locked - Fig. 1
When using the unit for the first time, iron a piece of cloth to make sure
that the device is working properly.
Do not use steam on the first use.
Caution: The soleplate (13) heats up very quickly but takes longer to
cool down. Take care not to touch the hot soleplate.
•
12 EN
3
4
2
1
12
13
14
6
7
5
11
".
8
9
10