System Installation - Korenix JetCon Serie Guia Del Usuario

System Installation

1. Mounting the Unit – DIN Rail
Din-Rail mount: screw up the DIN rail mount kit with 4 screws and mount
JetCon 2201 on the DIN Rail.
2. Mounting the Unit – Wall mount
DIP Switch RS-232
2201i
RS-232 to RS-422/485 Converter
+ +
PWR
TX
RX
RS-422/485-4w RS-485-2w 12-48V
3. Powering the Device
There is one earth grounding pole included in the power-input connector. Connect the earth
grounding of JetCon 2201 to ensure the system safety and prevent noise to obtain better
communication quality.
The standard DC power input is DC 24V with polarity reverse protection, the input voltage range
from 12V to 48V. Before install the power, please ensure the Switch power supply is UL certified
and the AC power source is turn-off.
Insert the flat screw
driver into the bottom
of clip to loosen the
clip from the track
3.5mm
Wall Mount Screw
7.00mm
Pull down after screw-up the screws to
Lock on the wall