English
Connection for PoE Cameras
SW1 = P2
SW2 = 1-4 ON
To Camera
PoE OUT
RJ45 PoE Port
Connecting Power to the Housing
Connect the housing (PoE IN) to a LevelOne High-Power injector/switch (POI-4000, FSW-0513).
Note: This product does not support standard IEEE 802.3at/af. Use only with LevelOne
High-Power PoE products (POI-4000, FSW-0513).
Warning
To reduce the risks of an electric shock, do not expose inside of this unit to rain or
moisture.
Follow all wiring instructions carefully. Altering the switches may cause damage to
the housing or the camera.
3