Idiomas disponibles
Idiomas disponibles
English
Installing The Camera In The Housing
1
2
3
1. Fasten camera on mounting board with 1/4 screws.
2. Fasten camera mounting board to camera housing with 3x8 double washer screws.
3. After internal wiring is complete, close the housing and tighten the four screws.
Installing The Bracket
1
2
3
1. Fix the bracket onto wall.
2. Through the rubber gasket, tighten up the bottom of the housing with the flat head 6x8 Hex
socket cap screw.
3. Adjust camera angle and tighten up the bolt as shown in the figure.
1
