Safety Precautions; Specifications - ekwb EK-AIO Elite 360 D-RGB Manual De Instalación

This product is intended for installation by expert users only. Please, consult with a qualifi ed
technician. Improper installation may result in damage to your equipment. EK Water Blocks
assumes no liability whatsoever, expressed or implied, for the use of these products or their
installation. The following instructions are subject to change without notice. Please visit our web
site at www.ekwb.com for updates.
NOTE ON ENVIRONMENTAL PROTECTION:
After the implementation of the European Directive 2012/19/EU in the national legal system, the
following applies:
• Electrical and electronic devices may not be disposed of with domestic waste.
• Consumers are obliged by law to return electrical and electronic devices at the end of their
service lives to the public collecting points set up for this purpose or point of sale. Details to
this are defi ned by the national law of the respective country. This symbol on the product, the
instruction manual or the package indicates that a product is subject to these regulations.
By recycling, reusing the materials or other forms of utilising old devices, you are making an
important contribution to protecting our environment.

1. SAFETY PRECAUTIONS

1. Keep and store the product away from the reach of children.
2. Check the component list and condition of the product before installation. If you encounter
a problem, contact the shop where you have purchased the product to get a replacement or
a refund.
3. EKWB d.o.o. is not responsible for any damages due to external causes, including but not
limited to: improper use, problems with electrical power, accident, neglect, alteration, repair,
improper installation, and improper testing.
4. CPU and motherboard are subject to damage if the product is incorrectly installed.
5. The excessive force exerted on the fan may cause damage to the fan and/or system.
6. This product is a CPU liquid cooling solution kit, comprising of individual original EKWB parts.
Combining this liquid cooling unit with parts, other than EK Water Block products, may lead to
warranty loss.
7. Product design and specifi cations may be revised to improve quality and performance.
8. You must not run the pump below 20% RPM. The pump must stay within a 20-100% PWM
duty cycle at all times. We recommend to always run the pump at 100%.

2. SPECIFICATIONS

Model EK-AIO Elite 360 D-RGB
Dimensions 397 x 120 x 27 mm
Radiator
Material Aluminium
Dimensions 120 x 120 x 25 mm (6x)
600-2200 RPM ±10%
Speed
(PWM: 25-100%)
Life Expectancy 50 000 hours
Fan
Noise Level 33.5 dB
Bearing Type Fluid Dynamic bearing (FDB)
Connector 4-Pin
Rated Voltage 12V
Dimensions (mm) 88 x 70 x 63 mm
1000 – 3300 RPM +- 10% (PWM
RPM
Range: 25 – 100%)
Pump
Life Expectancy 50 000 hours
Input Current 0.65 ±10% A
- 4 -
EK-AIO Elite 280 D-RGB
313 x 140 x 27 mm
Aluminium
140 x 140 x 25 mm (4x)
500 - 2000 RPM ± 10%
(PWM: 25-100%)
50 000 hours
33.5 dB
Fluid Dynamic bearing (FDB)
4-Pin
12V
88 x 70 x 63 mm
1000 – 3300 RPM +- 10% (PWM
Range: 25 – 100%)
50 000 hours
0.65 ±10% A