Add/Edit Profile; System Configuration - Ansel 2613 Guia Del Usuario

ADD/EDIT Profile

1. System Configuration:

1 Profile Name: User chose name for this profile.
2 SSID: User can key in the intended SSID name or use pull down menu to select from available
APs.
3 Power Save Mode: Choose from CAM (Constantly Awake Mode) or Power Saving Mode. There is
a check box for CAM when AC power? When this is checked, the wireless NIC will stay full power
when AC power cord is plug into power outlet.
4 Network Type: There are two types, infrastructure and 802.11 ad-hoc modes. Under ad-hoc
mode, user can also choose the preamble type; the available preamble type includes short and long.
In addition to that, the channel and Ad hoc wireless mod field will be available for setup in ad-hoc
mode.
5 TX Power: Transmit power, the amount of power used by a radio transceiver to send the signal
out. User can choose power value by sliding the bar.
6 Preamble: There are three types, Auto, Long and Short are supported.
7 RTS Threshold: User can adjust the RTS threshold number by sliding the bar or key in the value
directly. The default value is 2347.
Fragment Threshold: User can adjust the FRG threshold number by sliding the bar or key in the
value directly. The default value is 2346.
Página 34 de 41