Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
16. Longer life and better performance can be obtained if the battery
pack is charged when the air temperature is between 18°C and
24°C. Do not charge the battery pack in air temperatures below
0°C, or above 40°C. This is important as it can prevent serious
damage to the battery pack.
17. Charge only battery pack of the same model provided by
Manufacturer and of models recommended by manufacturer.
18. After charging, disconnect the battery charger from the supply
mains. Then remove the chassis connection and then the battery
connection.
TECHNICAL DATA
Type
CSC18LD.R- (CSC-designation of machinery, representative of Mini circular saw multi-
uses 18V)
Voltage
Charger input
Charger output
Charger Model
Battery pack model
No. Of battery cells
Battery capacity
Charging time
Speed
Spindle thread size
Blade size
Max. cutting depth
Cutting Depth at 90°
Recommended maximum material thickness
PVC pipe (radius)
Machine weight
Permitted wheels
Diamond segmented wheel Φ85xΦ15x1.2 6 segments, negative rake angle Max. Peripharal gap
124
Wood
Aluminum
Tile
Sheet steel
Suitable for Materials: Aluminum, wood, plastic, drywall, Sheet steel.
Suitable for Materials: Ceramic and stone tile, cement backerboard
ABP1820SD / ABP1830SD
TCT wheel Φ85xΦ15x1.2 24 Teeth
Suitable for Materials: Wood, plastic, composites.
HSS Wheel Φ85xΦ15x1.2 44 Teeth
18V
100-240V~50/60Hz,42W
10.8--20V
1500mA
ACG1815D
5 / 10
2.0Ah Li-Ion / 3.0Ah Li-Ion
80min / 2h
n
(n):2300 /min
o
85mm
27mm
27mm
0.91
2.2 Kg
between segments: 10mm
M6
27
3
13
8
Tabla de contenido
