Promate SolarLamp-1 Manual De Instrucciones página 5

English
Dual Way of Charging Battery
1. By Solar Panel
Plug the solar panel's 2-in-1 cable into the 2 lamps and expose the solar panel
to direct sunlight
2. By Micro USB Input
Plug the Micro USB cable into the lamp
For best performance
• Always keep the surface clean and avoid scratching it
• Always place the solar panel in an area that gets as much sunlight as
possible
• Store the solar panel indoors when not in use; it will prevent damage due
to bad weather
• Keep the lamp shaded from the sun during charging to protect it well
Battery care & Maintenance
The SolarLamp-1 uses a 3.7 volt, 2600mAh Lithium rechargeable battery.
To keep your battery working perfect
• Immediately charge the battery after complete discharge
• Never level the battery in a fully discharged state
• Recharge the battery even if fully charged at least once every two months
Attention:
• Do not use this battery for other products
• When replacing the battery, ONLY USE a 3.7volt Lithium rechargeable
battery for replacement
4