Eschenbach visolux Manual De Instrucciones página 39

press the
Select "24H" and then press the
24-hour display and the 12-hour display usually used in En-
glish-speaking areas.
Alternatively, you can also use the button
value of a selected parameter and the
crease it.
Use the symbol to return to the settings menu.
Updating the firmware
Select this symbol and then press the
current version of firmware on the device and to update it if
necessary. If you register your visolux DIGITAL HD, you will be
informed about any available software updates.
To update the firmware, please proceed as follows:
1. Connect the visolux DIGITAL HD to a PC using the USB ca-
ble supplied. Ensure that the SD card is located in the card
slot (l).
2. Switch the visolux DIGITAL HD on. The contents of the SD
card will now be displayed on the PC as the "ESCHENBACH"
drive.
3. Use the connected PC to open the web address which was
provided in the email informing you about the firmware
update.
4. Download the firmware update and save the file "VDHOST.
BRN" directly onto the drive, not into a subdirectory.
5. Disconnect the visolux DIGITAL HD from the PC using the
"Safely Remove Hardware and Eject Media" function - you
can find the symbol for this function in the operating sys-
tem taskbar.
button to select the next parameter for setting.
button to switch between
button (f) to de-
button to display the
- 36 -
(d) to increase the