General Description; Technical Data - Eldom mixi BJ2S Manual De Instrucciones

INSTRUCTION MANUAL
EN
BLENDER BK2S

GENERAL DESCRIPTION

1. Measuring Cup
2. Lid
3. Glass Jar
4. Sealing ring
5. Cutting blade
6. Cup base
7. Motor Base
8. Rotary switch
9. Jar Assembly

TECHNICAL DATA

- power: 500W
- mains voltage: 230V ~50Hz
- maximum time of
continuous operation: 3 minutes
- break before continuation of
operation: 1 minute
OPERATION
All parts of the blender are to be thoroughly cleaned before being used for the first time.
(see section: cleaning and maintenance).
Assembling the Glass Jar:
- Make sure that the blender is switched off (Switch in the '0' setting).
- Put the rubber sealing ring (4) on the inner edge of the blade unit (5).
- Put the blade unit with sealing ring into the cup base (6).
- Insert the assembled Cup Base onto the bottom of the glass jar and secure tightly.
- Mount the glass cup (3) onto the cup base unit and tune the cup base unit, and turn
clockwise until glass jar locks into place.
- Mount the Measure Cup (1) onto the Lid (2).
- Secure the Lid onto Glass Jar and press down.
How to Use
- Place the foodstuff you wish to process into the glass jar.
- Put the lid on the glass jar and close securely. Place the measuring cap into the hole in
the lid and turn clockwise to lock.
- Switch on the motor base (see table: speed setting)
Make sure you observe the maximum time of continuous operation of the appliance.
Exceeding the time limit and failing to provide appropriate breaks during the operation of
10|EN
9
8
7
1
2
3
4
5
6