Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Never touch turning parts with your hands or any other way ,
NEVER operate the machine without any original safety devices under perfect conditions.
4.5 After Finishing The Work
4.5.1 Precautions
Always TURN THE MACHINE OFF before cleaning by removing the plug from the socket.
Never clean the machine unless it has come to a complete stop.
Put all the components back to their functional positions before turning the machine ON
again.
Check the level of oil.
Do NOT insert your fingers in between belts and pulleys nor chains and gears.
4.6 Maintenance
4.6.1 Danger
Any maintenance with the machine in working situation is dangerous. TURN IT OFF BY
PULLING THE PLUG OFF THE SOCKET DURING MAINTENANCE.
IMPORTANT
Always remove the plug from the socket in any emergency situation.
4.7 Warning
Electrical or mechanical maintenance has to be undertaken by qualified personnel. The
person in charge of maintenance has to be sure that the machine is under TOTAL SAFETY
conditions when working.
5. Analysis and Problems Solving
5.1 Problem, causes and solutions
The Professional Blender has been designed to require minimum maintenance. However,
some performance failures may happen due to natural wearing caused by the use of the
equipment.
If any problem arises with your Professional Blenders , check the Table - 02 below, where
there are some detailed and recommended possible solutions.
11
Capítulos
Tabla de contenido
