Eldom floppi KT70 Manual De Instrucciones página 9

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
GENERAL DESCRIPTION
1. Electric mat
2. Switch with a temperature adjuster
3. Remote controller
TECHNICAL DATA
-
power:60W
-
supply voltage: 230V ~ 50Hz
OPERATION
Electric heating mat is irreplaceable in the case of pain in spinal nerves or rheumatic pains. Through
gentle and even warming of the entire body it improves your blood circulation, which in turn
improves your mood and overall mobility. The blanket should be placed under the body (blanket is
not designed for covering up).
The mat should be placed and can be mounted using straps on a bed or a mattress and covered with
a sheet, then plug into an socket with the correct voltage (see TECHNICAL DATA).
To activate, the switch (2) should be moved in the selected position:
0 off
1 gentle
2 strong(recommended to heat up a bed or a mattress 2 hours before sleeping (then the "1"
position is recommended), it helps remove dampness accumulated in the mattress)
After using, move the switch in the "0" position, then disconnect the mat from the power supply.
CLEANING AND MAINTENANCE
-
before cleaning the device, disconnect it from the power supply and leave to cool off,
do not immerse the device with the cord-attached control on (3) into water or other liquids
-
-
The blanket can be hand-washed in warm water and a washing powder. Immersed the device
into water after disconnecting the cord-attached control (3), wash gently, rinse thoroughly, then
carefully squeeze out the excessive amount of water without bending the blanket.
-
do not dry clean
-
do not iron
-
do not dry in a clothing dryer
-
stains should be cleaned off with a sponge damped with water and soap
OPERATING INSTRUCTION
ELECTRIC BLNAKET KT70
1
3
2
do not power on
when fold
EN
EN
9
Tabla de contenido
loading

Este manual también es adecuado para:

FloppiKt70

Tabla de contenido